Shaped Lock Rod
The special-shaped lock body bar produced by our company has thousands of specifications such as flat square shape, drum shape, gourd shape, various hollow special shapes, etc., and can be customized production according to customer requirements. Because of its good cutting performance, it is widely used in padlocks, door locks, smart locks, etc.
Shaped Lock Rod Certifications
Shaped Lock Rod Performance Advantages
- Good mechanical properties
- Excellent machining performance
- Excellent corrosion resistance
Shaped Lock Rod Application fields
Lock cylinder
Shaped Lock Rod Performance parameterdownload
| Product name | Grade | chemical composition %，Not greater than (except for the remaining amount and range value) | ||||||||||||
| Cu | Pb | Fe | Ni | Sn | Mn | P | Si | AL | Zn | 其他 | 其他总杂质 | 杂质总和 | ||
| Shaped Lock Rod | CW614N | 57.0～59.0 | 2.5～3.5 | 0.3 | 0.3 | 0.05 | 0.2 | |||||||
| C3604 | 57.0～61.0 | 1.8～3.7 | 0.5 | 余量 | Fe+Sn1.0 | |||||||||
| HPb58-2A | 56.0～60.0 | 2.0～3.2 | 余量 | |||||||||||
| HPb58-2C | 54.0～58.0 | 2.0～5.0 | ||||||||||||
| HPb58-3 | 57.0～60.0 | 2.0～3.5 | 0.5 | 余量 | 1.0 | |||||||||
Shaped Lock Rod Production Process
The conventional production process:
Raw material → Melting → Analysis in furnace → Horizontal continuous casting → Sawing → Profile inspection → Wire drawing → Annealing → Finishing → Product inspection → Finished product
Shaped Lock Rod Executive Standard
Product performance standards: Q/JTTY 01-2018、YS/T 862-2013
Shaped Lock Rod Production Equipments
Smelting workshop
Related Products
The free-cutting brass products produced by our company are suitable for various structural parts made by hot punching and cutting, as well as automatic lathes and CNC lathes, such as hardware, electrical connectors, and connectors. 
Our company produces round, square, hexagonal and special-shaped brass rods and wires with specifications ranging from Φ2mm to 95mm, and products with different mechanical properties can be customized according to customer requirements.
This product has good plastic toughness, suitable for all kinds of cold stamping and deep drawing parts, such as pins, rivets, washers, nuts, catheters, radiator parts, small hardware parts and so on. — Online Contact —
Ms.Yu
电话：19975329387
QQ：2885169920
邮箱：yujl01@jtgroup.com.cn
Ms.Song
电话：19975329387
QQ：2885169920
邮箱：yujl01@jtgroup.com.cn
Ms.Sun
电话：19975329387
QQ：2885169920
邮箱：yujl01@jtgroup.com.cn
