Ordinary Brass Rod
Our company produces round, square, hexagonal and special-shaped brass rods and wires with specifications ranging from Φ2mm to 95mm, and products with different mechanical properties can be customized according to customer requirements.
This product has good plastic toughness, suitable for all kinds of cold stamping and deep drawing parts, such as pins, rivets, washers, nuts, catheters, radiator parts, small hardware parts and so on.
Ordinary Brass Rod Certifications




Ordinary Brass Rod Performance Advantages
- Good mechanical properties
- Good plasticity in hot state and cold state
- Good corrosion resistance
- Good brazing and weldability
Ordinary Brass Rod Application fields

6-258 Temperature Measuring Ball Valve

Plumbing Bathroom

Elbow Fittings
Ordinary Brass Rod Performance parameterdownload
Product name | Alloy grade | Chemistry componet %(no more than) | |||||||||
Cu | Pb | Fe | Ni | Sn | Al | Zn | Mn | Sum of other impurities | Sum of impurities | ||
Ordinary brass | H59 | 57.0~60.0 | 0.5 | 0.3 | 1.0 | ||||||
H62 | 60.5~63.5 | 0.08 | 0.15 | 0.5 | |||||||
H63 | 62.0~65.0 | 0.08 | 0.15 | 0.5 | |||||||
H65 | 63.0~68.5 | 0.09 | 0.07 | 0.45 | |||||||
H68 | 67.0~70.0 | 0.03 | 0.1 | 0.3 |
Ordinary Brass Rod Production Process
The conventional production process:
Raw materials → Melting → Furnace analysis → Horizontal continuous casting & semi-continuous casting → Sawing → Billet section → Heating → Extrusion → Profile inspection → Drawing → Annealing → Finishing → Product inspection → Finished product
Ordinary Brass Rod Executive Standard
Product performance standards: GB/T 4423-2007
Ordinary Brass Rod Production Equipments

Joint drawing machine

Large tonnage reverse extrusion machine

1250T Extruder Special Melting Casting Furnace

Smelting workshop
Related Products


